HD-SU01 Super One Series – 1 to 1

Super One Series – 1 to 1 HDD/SSD Duplicator and Sanitizer (HD-SU01)

  • Speed transfers of up to 9GB per minute.
  • Bit-by-bit Data Comparison.
  • Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4), and Mac (HFS, HFS+, HFSX).
  • Data Sanitization: Quick erase, Full erase, DoD erase and Secure erase.


All Available Models :

Super One office series is a professional SATA Hard Disk Drive duplicator, specially designed for easy office duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy HDD targets with a high transfer speed of 9GB per minute.

We guarantee highest productivity without speed degradation even as the number targets increases. The Super One series SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/64), and Mac (HFS, HFS+, HFSX) format are all supported with quick copy mode.

In addition, the Super One series SATA Hard Drive duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for hard drive wiping.

Impeccable High Speed

U-Reach Super One Series Hard Drive duplicator is capable of copying at 9GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Intelligent Duplication Modes

U-Reach Super One Series Hard Drive duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

Sanitization Methods

  • Quick Erase:
    Erase HDD index table, and only takes A FEW SECONDS to complete.
  • Full Erase:
    Erases the entire HDD.
  • DoD Erase:
    Complies with U.S. Department of Defense erasure standards.
  • Secure erase:
    A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern SATA/SAS HDD.

High Compatibility

  • Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
  • Whole media copy mode supports all system and proprietary formats.
  • Supports various brands.
  • Designed to support 18TB+ capacities.
  • Supports MBR and GPT partitioning.

Double Data Verification: Compare + CRC Checksum

U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

Interface Compatibility

Supports 2.5” HDD/SSD, and M.2 (NGFF) (requires 2.5″ to 3.5″ HDD Caddy).

Model HD-SU01 HD-SU03 HD-SU05 HD-SU07 HD-SU11
Targets 1-1 1-3 1-5 1-7 1-11
Speed 9GB/min. (150MB/sec.) *Actual performance is dependent on HDD transfer speeds.

Compatible Interfaces w/o Adapters: 3.5” SATA HDD

Copy Formats All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown.
Quick Copy: copies FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).
Operating Type Stand-alone, non PC-based operation
Language Support English, Japanese
Display Backlit Monochrome LCD Display
LEDs 3 LED Indicators per Port:

Yellow (Power), Green (Pass), Red (Fail)

Control Panel 4 Push Buttons (▲, ▼, OK, ESC)
Features Copy Function Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Skip Bad-Sectors Manually set (Bad sector) threshold range to skip during copy process
Compare Function Bit-for-bit data comparison
Erase Modes Quick Erase, Full Erase, DoD Erase, and Secure Erase
OS Supported All (Windows, Linux, and other stand-alone systems)
HDD/SSD Compatible w/o Adapter: 3.5” SATA HDD
w/ Adapters: 2.5” SATA/SSD
Advanced Formats Supports MBR, GPT, and Advanced formats.
Capacity · Embedded controller is designed to support capacities over 18TB+.
· Constant improvement supports latest market-available devices.
Hardware Specifications Power Supply Selectable Voltage 115V or 230V, 50/60Hz
Temperature range Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
Humidity Range Working Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
Certification FCC, CE, RoHS

Additional information

All Available Models

, , ,