Model 310E – CoreStat® Self-balanced Air Ionizng Blower

Model 310E – CoreStat® Self-balanced Air Ionizng Blower

  • CoreStat® Self-balanced Technology
  • Steady-State DC Ion Emission
  • No Calibration Required
  • Class 0 & Versatile Applications
  • Audio & LED Alarm for HVP/Balance
  • Emitter Point Easy Clean and Replace
  • Facility Monitoring System (FMS) Interface
  • One-Touch Auto-Cleaning Button
  • Emitter Point Auto-Cleaning Brush


Tribocharging is a typical ESD source and induced field from insulators must be controlled in EPA (ESD protected area). Process required insulators are commonly used in many places and should be neutralize by ionization systems.

CoreStat® self-balanced technology, Model 310E is designed as class 0 and versatile applications for semiconductor back-end, printed circuit board assembly and general electronics applications. Model 310E ionizing blower does not required regular based calibration and intrinsically maintains low offset voltage within a spec.

The New RJ-45 Facility Monitoring System (FMS) interface will give real time ionizer status monitoring. Visual (LED) and audible (buzzer) alarms operates when HV power fail and out of balance status. Built-in auto-cleaning brush and button will reduce significant maintenance resources.

Input Voltage 24 VDC, 6.9 W Max.
Ion Emission Steady-state DC Technology
Balance <±10 V
Discharge Time ±1000 V to ±100 V less than 3 sec (30 cm)


Air Flow 60 CFM
Emitter Points Tungsten 99.99%
Alarm Visual & Audio alarm operate for power failure and out of balance
Monitoring RJ-45 Terminal interface
Material Enclosure & Filter Cover: ABS plastic
Bracket: Aluminum
Dimensions (mm) 125W x 135H x 70D (without bracket)
152W x 155H x 70D (with bracket)
Weight 580g (with bracket)
Warranty 2 year limited warranty
Model Features
Model 310E
  • One-Touch Auto-Cleaning Button
  • Built-in Auto-Cleaning Brush
Model 310 Without Auto-Cleaning Brush & Button

Warranty : 2 year limited warranty