Tribocharging is a typical ESD source and induced field from insulators must be controlled in EPA (ESD protected area). Process required insulators are commonly used in many places and should be neutralize by ionization systems.
CoreStat® self-balanced technology, Model 310SE is designed as versatile applications for semiconductor back-end, printed circuit board assembly and general electronics applications. Model 310SE ionizing blower does not required regular based calibration and intrinsically maintains low offset voltage within a spec.
The New RJ-45 Facility Monitoring System (FMS) interface will give real time ionizer status monitoring. Visual (LED) and audible (buzzer) alarms operates when HV power fail and out of balance status. Built-in auto-cleaning brush and button will reduce significant maintenance resources.
|Input Voltage||24 VDC, 9.3 W Max.|
|Ion Emission||Steady-state DC Technology|
|Discharge Time||±1000 V to ±100 V less than 2 sec (30 cm)
|Air Flow||100 CFM|
|Emitter Points||Tungsten 99.99%|
|Alarm||Visual & Audio alarm operate for power failure and out of balance|
|Monitoring||RJ-45 Terminal interface|
|Material||Enclosure & Filter Cover: ABS plastic
|Dimensions (mm)||125W x 135H x 70D (without bracket)
152W x 155H x 70D (with bracket)
|Weight||580g (with bracket)|
|Warranty||2 year limited warranty|
|Model 310S||Without Auto-Cleaning Brush & Button|
|Model 310||Economic Version Without Options|
Warranty : 2 year limited warranty