Model 360A – CoreStat® Self-balanced Air Ionizing Blower

Model 360A – CoreStat® Self-balanced Air Ionizing Blower

  • CoreStat® Self-balanced Technology
  • Steady-State DC Ion Emission
  • No Calibration Required
  • Versatile Applications
  • Audio & LED Alarm for HVP/Balance
  • Small Size for In-Tool Application
  • Emitter Point Easy Clean and Replace
  • Facility Monitoring System (FMS) Interface

Description

Tribocharging is a typical ESD source and induced field from insulators must be controlled in EPA (ESD protected area). Process required insulators are commonly used in many places and should be neutralize by ionization systems.

CoreStat® self-balanced technology, Model 360A is designed as versatile applications for semiconductor back-end, printed circuit board assembly and general electronics applications. Model 360A ionizing blower does not required regular based calibration and intrinsically maintains low offset voltage within a spec.

Facility Monitoring System (FMS) interface will give real time ionizer status monitoring. Visual (LED) and audible (buzzer) alarms operates when HV power fail and out of balance status.

Input Voltage 24 VDC, 4.8 W Max.
Ion Emission Steady-state DC Technology
Balance <±10 V
Discharge Time ±1000 V to ±100 V less than 5 sec (30 cm)

specification

Air Flow 27 CFM
Emitter Points Tungsten 99.99%
Alarm Visual & Audio alarm operate for power failure and out of balance
Monitoring FMS monitoring interface
Material Enclosure & Filter Cover: ABS plastic
Bracket: Aluminum
Dimensions (mm) 80W x 110H x 64D (without bracket)
105W x 120H x 64D (with bracket)
Weight 340g (with bracket)
Warranty 2 year limited warranty

Warranty : 2 year limited warranty