U-Reach MTS-SAS series is a professional SATA/SAS HDD duplicator, specially designed for high volume duplication. Equipped with U-Reach ‘s unique multitasking technology. The MTS-SAS series Hard Drive duplicator can simultaneously copy all targets and with a high transfer speed up to 18GB per minute. We guarantee highest productivity without speed degradation, even when the number of targets increase.
The MTS-SAS series SAS/SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32 and Mac (HFS, HFSX, HFS+) are supported formats with quick copy. Quick copy mode copies data and skips blank area; this mode enhances copy speed.
In addition, the MTS-SAS series SAS/SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.
Impeccable High Speed
U-Reach MTS-SAS Series SATA/SAS HDD/SSD duplicator is capable of copying at 18GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Intelligent Duplication Modes
U-Reach MTS-SAS SAS HDD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.
- Quick Erase:
Erase HDD index table, and only takes A FEW SECONDS to complete.
- Full Erase:
Erases the entire HDD.
- DoD Erase:
Complies with U.S. Department of Defense erasure standards.
- Secure erase:
A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern SATA/SAS HDD.
Fast Erase Key
Fast Erase Key enables the end-user to perform erase functions asynchronously.
- Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
- Whole media copy mode supports all system and proprietary formats.
- Supports various brands.
- Designed to support 18TB+ capacities.
- Supports MBR and GPT partitioning.
Auto Rejection of Slow Devices
MTS-SAS Series HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
Double Data Verification: Compare + CRC Checksum
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
Skipping Bad Sectors
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
Optional Adapters Supported
Event Log Report
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
|Speed||18GB/min. (300MB/sec.) *Actual performance is dependent on HDD transfer rates.|
|Supported Formats||Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown.|
|Quick Copy: FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).|
|Operating Type||Stand-alone, non PC-based operation|
|Language Support||English, Japanese|
|Display||Backlit Monochrome LCD Display|
|LEDs||3 LED Indicators per Port:
Yellow (Power), Green (Pass), Red (Fail)
|Control Panel||4 Push Buttons (▲, ▼, OK, ESC)|
|Features||Copy Modes||Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy|
|Skip Bad-Sectors||Manually set (Bad sector) threshold range to skip during copy process|
|Compare Function||Bit-by-bit hardware-accelerated data comparison|
|Sanitization Modes||Quick Erase, Full Erase, DoD Erase, 7 write erase, Secure Erase,Enhance Secure Erase, and NSA Erase|
|Special Features||PC Monitoring||Real-time status monitoring through PC|
|Log Report Management||Monitor real-time recordings and Log Reports via PC-Link|
|Event log reports are generated through the USB port and saved to USB devices|
|OS Supported||All (Windows, Linux, and other stand-alone systems)|
|Compatible Interfaces||w/o Adapters: 1.8″/2.5″/3.5” SATA/SAS HDDs and SSDs|
|w/ Adapters: IDE, microSATA, mSATA and M.2|
|Advanced Formats||Supports MBR, GPT, and Advanced formats.|
|Capacity||Embedded controller is designed to support capacities over 18TB+.
Constant improvement supports latest market-available devices.
|Hardware Specifications||Power Supply||Selectable Voltage 115V or 230V, 50/60Hz|
|Temperature range||Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)|
|Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)|
|Humidity Range||Working Humidity: 20% ~ 80%|
|Storage Humidity: 5% ~ 95%|
|Certification||FCC, CE, RoHS|