PP201 – 1:1 Auto Detect NVMe & SATA M.2

1 to 1 Auto Detect NVMe & SATA M.2 Dupliactor and Sanitizer (PP201)

  • Speed transfers up to 9GB per minute.
  • Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4, LVM) and Mac (HFS, HFS+, HFSX).
  • Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase+Compare.
  • M.2 & SATA dual interface
  • Auto detect NVMe/SATA/AHCI signal
  • Hot swapping, automatic power-off
  • Link to PC for fast data access to the source drive
  • FPGA-based Standalone Operation
  • Compare + CRC checksum = 100% accuracy


Impeccable High Speed

U-Reach PP Series NVMe/SATA M.2 duplicator is capable of copying at 9GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Intelligent Duplication Methods

U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

M.2 & SATA Cross-interface mode

With cross-interface design, even if you use different interface devices, you can directly copy on the duplicator without installing drivers or restarting. It can meet the needs of customers with different devices.

High Compatibility

  • Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
  • Whole media copy mode supports all system and proprietary formats.
  • Supports various brands.
  • Designed to support 18TB+ capacities.
  • Supports MBR and GPT partitioning.

Dual data verification: Compare + CRC

In addition to the bit-to-bit comparison function, PP201 uses the CRC international calculation standard to confirm the correctness of the data, and whether the source data is correct. User only needs to confirm the CRC value at the end of the copy, and can also confirm whether the copied data is correct.

Specifications                Maximum Speed Supported 9GB/min
Copy Modes 1. System and Files copy (Quick Copy) : FAT16/32/64, NTFS, Linux(Ext2/Ext3/Ext4), Mac(HFS/HFS+/HFSX)

2. All Partitions

3. Whole Device

4. Percentage Copy

Supported OS All (Windows / Mac / Linux / other proprietary systems), LVM format supported
Operation Mode Standalone, FPGA-based Operation
LCD Display 2×20 Backlit Monochrome LCD Display
LEDs 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail)
Control Panel 4 Push Buttons (▲, ▼, OK, ESC)
Functions Copy Modes Quick Copy (System and Files) / All Partitions / Whole Device / Percentage Copy
Sanitization Quick Erase, Full Erase (NIST 800-88)/DOD erase/Secure erase
Other functions Bit-by-bit compare, bad sector counting, skip the number of bad sectors setting
Compatibilities Compatible Device Directly compatible with:M.2(NGFF) B Key & B+M Key interface, SATA interface.
Compatible Signal NVMe, AHCI, SATA
Device Require Optional Cable or Adapters Support MBR、GPT

Support over 18TB+ of drive

Hardware Specifications Power Requirements 12V 5A Power Adaptor
Working Temperature 5°C ~ 45°C Storage temperature -20°C ~ 85°C
Working Humidity 20% ~ 80% Storage Humidity 5% ~ 95%
Product Dimensions 180 mm X 156 mm X 34 mm
Product Weight 888g (product net weight) / 2450g (product gross weight)
Packaging 340mm X 280 mm X 190 mm

M.2 socket – P1098

mSATA to SATA adapter – P1041

CFast to SATA adapter – P1053

Cfexpress adapter