RS232/485 Power Controller

RS232/485 Power Controller

• Power control by RS232 (ASCII command).
• Power control by RS485 (MODBUS RTU).
• Select RS232 or RS485 via DIP to control power switch. Maximum 30 IDs can be set. RS232/RS485 baud can be set via DIP.
• Support power monitoring and can detect if switch status was ON (consumed power over 0.5A will be defined as ON).
• IR signal will not be transmitted if detected status was ON.
• If detected switch status was “not” ON, IR signal will be transmitted 3 times (2 seconds interval time between every transmit).
• IR (infrared) receiving and transmitting. Can learn 8 IR signals.
• Panel button can control power switch by manual and learn IR signal.
• Keep last power status when lost power.
• Once power comes back and if last power status is ON, will transmit IR signal automatically.gnal automatically.