Komodo CAN Duo Interface
TP360110
The Komodo™ CAN Duo Interface is a powerful two-channel USB-to- CAN adapter and analyzer. The Komodo interface is an all-in-one, high-performance solution for transmitting and monitoring CAN data. It provides fast, interactive, real-time visibility into the protocol layer of your CAN embedded system.
- Dual-channel: two independent customizable CAN channels
- Configurable as an active node or non-intrusive analyzer
- Simultaneously record all bus traffic while acting as an active node
- Communicate or monitor two different CAN buses with a single Komodo interface
- Transfer rate up to 1 Mbps
- Independent galvanic isolation per CAN channel
- 8 configurable GPIOs
- Fully supports Fault Tolerant (125 kbps and High Speed (1 Mbps) CAN
- USB 2.0 full-speed; bus-powered
Komodo CAN Duo Interface Quick Start
Watch how to easily get started using the Komodo CAN Duo Interface for your CAN applications.
Tech Specs
Target Bus Interface
- CAN: Up to 1 Mbps
- Compatible with ISO 1898-2:2003 (High-Speed CAN)
Target Device Port
- 2 DB9 connectors
- 2 block screw terminals
Analysis Port (connects to PC):
- USB 2.0 Type-B receptacle
- Interface is bus-powered
Digital I/O Port
- Mini-DIN 9 connector: 4 inputs, 4 outputs, 1 ground
- Digital inputs are rated for max 5.5V
- Digital outputs are rated for 3.3V
Operating Temperature
- Industrial: -40 to 85 Degrees C (-40 to 185 Degrees F)
Hardware
- Komodo CAN Duo Interface
- 6 ft USB-A to USB-B Cable
- 3 ft DB9 F/F Cable
- 1.5 ft Mini-DIN 9 Digital I/O Cable
- One Year Warranty
Software (web downloads)
- Data Center Software
- Komodo GUI Software
- Komodo Software API
- Komodo LabVIEW Driver
- USB Drivers
Minimum Hardware Requirements
- Intel or AMD processor operating at 2 GHz or faster
- 1 GB physical RAM (32-bit) or 2 GB RAM (64-bit)
- 2 GB or more available hard disk space
- Full-speed USB port
- VGA capable of 1024-x768 or higher screen resolution
- Internet access is helpful
Available Software
- Data Center Software
- Komodo GUI Software
- Komodo Software API
- Komodo LabVIEW Driver
Required Software (Windows & Linux)
- USB Drivers
PC Requirements & Supported Operating Systems
- Windows: 7, 8, 8.1, 10
- Linux: Red Hat, SuSE, Ubuntu, Fedora
- Mac OS X: 10.7 – 10.14
Dimensions and Weight
- (W x D x L) 64 mm x 24mm x 102mm (2.5″ x 0.94″ x 4″)
- 110 g (0.24 lbs)
Quality
- CE
- RoHS
- One Year Warranty
- Manufacturing
- ISO 9001
- ISO 13485
- AS9100C
- ITAR