SF600Plus
SF600Plus
The SF600Plus is a high speed SPI Flash programmer designed for both In System Programming (ISP) and offline programming applications. Featuring built in memory for standalone operation, it enables efficient programming of SPI Flash devices without requiring a continuous PC connection. With high speed USB connectivity, support for low voltage devices, and multi-programmer capability, the SF600Plus is ideal for development, testing, and production environments.
End of Life Notification:
SF600Plus is directly replaced with SF600Plus-G2. The new generation SF600Plus-G2 is fully compatible with SF600Plus in hardware and software reliability and quality. The SF600Plus-G2 is more flexible to fulfill the Flash device’s development needs.
SF600Plus Feature
SF600Plus is a high-speed “In-System Programming” programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.
SF600Plus combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.
SF600Plus is an upgraded version of SF600. The main difference is that SF600Plus embeds 4GB of memory, which allows standalone programming.
SF600Plus Highlights
- USB High speed and high SPI performance, support up to 2Gb SPI Flash
- In-Circuit Programming: Program onboard SPI Flash
- Off-line Programming: Program SPI Flash in the socket
- Start button feature: Able to Batch in the USB mode
- Standalone mode: Support Start button programming and IO Port programming.
- ISP Port supports 2 CS pins to program two Serial Flash memories
- Signal conflict protections
- Multi-Programmers Capability through USB
- Support 1.8V low voltage IC
- Support Windows 2003 and above
- Support both 32 and 64-bit OS
High performance (25MHz, Single IO)
| USB Mode | Reference IC | Density | (Program + Verify) |
| Memory size | W25X80VSSIG | 8Mb | 9s |
| W25Q16VSSIG | 16Mb | 11.6s | |
| W25Q32VSSIG | 32Mb | 12.6s | |
| W25Q64FVSSIG | 64Mb | 31s | |
| W25Q128BVFIG | 128Mb | 61.7s | |
| W25Q256FVFIG | 256Mb | 89.2s | |
| S25FL512SAGMFI011 | 512Mb | 147.4s |
*Please note the programming and verify time will depend on different IC types; please refer to the IC specification before programming.
Hardware
SF600Plus is designed with an ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory, and control the controller or application status. Please refer to Table 1 for the SF600Plus 2×10 header pin out. DediProg also provides the SF600Plus ISP Cable which is used to connect the programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600PlusISP Cable 2×6 pin out.
Table 1: SF600Plus ISP Header Pin Out (2×10)
| 1 | Vpp | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
| 11 | NC | Reset/IO3 | 12 |
| 13 | NC | NC | 14 |
| 15 | NC | NC | 16 |
| 17 | NC | NC | 18 |
| 19 | GPIO1 | GPIO2 | 20 |
Table 2: ISP Cable Connector Pin Out (2×6)
| 1 | Vpp | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
| 11 | NC | Reset | 12 |
The SF600Plus USB software toolchain offers high flexibility and fits the different and highest requirements:
Engineering Mode
For engineers and experts to access advanced features for development, repair, etc.
Production Mode
For operators in production to control multiple programmers and improve the throughput.
Command Line
Customer software can control multiple SF600Plus programmers by command line interface.
Hardware Requirement for ISP :
To have a clear understanding of the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106 and In-System Programming (ISP) for Serial NOR Flash
Standard Package
- SF600Plus Programmer x 1
- USB Cable x 1
- AC Power Adaptor x 1
- ISP Cable (ISP-600-CB1-G) x 1
- SF100 2.54mm 2*4 ISP Cable (ISP1-CB) x 1
- SF600 Universal Adaptor (ADP-SF600-TO-SF100) x 1