Heat Sinks for Analog Devices
For Analog Devices eval boards for AD9166, AD9986/8, AD9081/2, and the quad-MxFE
ATS has partnered with Analog Devices to design a fanSINK specific to the ADI reference designs AD9166, AD9986/8, AD9081/2, and the quad-mxFE. The new fanSINK works to provide air flow directly to the communications, mixed signal, RF devices on these evaluation boards, enabling them to operate to their design performance specification.
| Dimensions | |
|---|---|
| Length (A) | 20.25 mm |
| Width (B) | 20.25 mm |
| Height (C) | 13.50 mm |
| Base Width ( D ) | 14.0 mm |
- Heat sink includes 7/8″ screws, which fit 10mm thick fans.
- Product hole pattern is 20 mm C-C (center to center)
- Component Attachment: ATS superGRIP™ is a proven high reliability mechanical attachment system
- superGRIP™ hardware includes a high performance plastic frame clip and 300 Series stainless steel springclip-avoiding PCB through holes
- Provided with pre-assembled Thermal Interface Material (TIM) centered on base
- “Keep-Out” Requirements: An “Un-Populated” boarder zone of 3.5mm around the component is necessary to facilitate the installation/removal of the superGRIP™. Please refer to the superGRIP™ Keep-Out Guidelines and Installation/Removal Instructions for further details
- Fan no included
The ATS-2651-C2-R0 may be used on the following Analog Devices evaluation boards
- AD9166
- AD9986/8
- AD9081/2
- Quad-MxFE
* If you need Datasheet, CAD or RoHS, please contact us.
| Part Number | Lifecycle Status |
Dimension (mm) | Thermal Resistance (R,°C/W) at Air Velocity(V,ft/min.) |
R (Natural Convection) °C/W |
R (200 ft/min.) °C/W Ducted |
Fin Tip | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| L | W | H | V=200 | V=400 | V=600 | V=800 | |||||
| ATS-2651-C2-R0 | ACTIVE | 21.0 | 21.0 | 13.5 | 2.8 | N/A | N/A | N/A | N/A | N/A | N/A |