MBT3210
4x10G Bit Error Ratio Tester
4 parallel 10G NRZ channels
Support 350 Mbps ~ 15 Gbps rate
Fast rising and falling edge
Low jitter
- Wide speed range – Support 350 Mbps ~15 Gbps standard test rate
- Support parallel testing – Four channels can be tested independently or synchronously
- High speed clock output – IProvide half-rate clock (high speed) and sub-trigger signal output (low speed)
- Built-in clock recovery – Built-in clock data recovery of each channel
Functions and advantages
It covers a wide range of rates and supports a variety of protocols
| Agreement | Rate |
| Ethernet | 1.25/2.5/9.953/10.3125 Gbps |
| Fiber | 4.25/8.5/14.025 Gpbs |
| G.984.2 | 622 Mbps/2.488 Gbps |
| InfiniBand | 2.5/5/14.0625 Gbps |
| SONET/SDH | 622 Mbps/2.488 Gbps/9.953 Gbps/10.709 Gpbs/11.096 Gbps |
| n Generator Technical
Indicators |
Type of output | Differential | AC coupling; 100 Ω terminal |
| Single ended | AC coupling; 50 Ω terminal | ||
| Output amplitude | 100~1200 mVp-p | Differential | |
| Rise Time | 30 ps | 20%~80% | |
| Shake | 1.5 ps | Root mean square (RMS) jitter | |
| 9 ps | Peak-to-peak Jitter | ||
| Clock channel | The front panel provides half rate differential clock and frequency division trigger signal output | ||
| Bit Error Detection Channel | Input type | Differential / single ended | |
| Impedance | 100 Ω | ||
| Input amplitude range | 800 mVp-p | ||
| Sensitivity | <100 mV | ||
| Clock mode | Built-in Clock Recovery | ||
| Synchronization | Automatic phase synchronization by level | ||
| Connector | 2.92 mm female，50Ω | ||
| General indicators | work | 0°C~+55°C，30%~80% Relative Humidity with no condensation | |
| Storage | -30°C~70°C，10%~90% Relative Humidity with no condensation | ||
| altitude | Operation：0m to 2000m，
Storage：0m to 4600m |
||
| Power Supply | LINE：100-240 VAC，50/60 Hz，250 W
FUSE：T2AL 250 VAC |
||
| Size | 438*214*105 mm (with foot pad/handle) | ||
| Weight | Net Weight 3.7 kg | ||