Dynamic Temperature Forcing System
CTS0303C, CTS0303D
The Test Thermal Control System is designed for precise temperature control of low to high-power devices, enabling rapid temperature transitions across a wide operating range of -40°C to +150°C. With exceptional cooling and heating capacity, it ensures accurate thermal management for various IC package types. Optimized for Tcase and Tjmax testing, it seamlessly integrates with bench handlers for automated testing, making it an ideal solution for demanding test environments.
| Specifications | ||
|---|---|---|
| Temperature Range | -40°C to 150°C Accuracy: 2°C with no load (T/C Accuracy is 1°C) Stability: 1°C under controlled conditions Tolerance: ± 3°C at steady state |
|
| Temperature | Ramp rate heating: >0.85°C/sec | |
| Transition Rates |
Ramp rate cooling: >0.60°C/sec | |
| Contact Force |
100kg (max) | |
| DUT Dimensions |
3x3mm to 70x70mm | |
| Communication | USB / RS232 / RS485 | |
| Dimension & Weight | ||
|---|---|---|
| Thermal Head | L125mm x W72mm x H30mm / 7kg | |
| Thermal Controller | L400mm x W130mm x H185mm / 10kg | |
| Chiller | L450mm x W700mm x H690mm / 110kg | |
| System Requirements | ||
|---|---|---|
| System Protection | – Over-Voltage / Over-Current / Surge Protection – Over-Temperature Protection – Electric Leakage Protection |
|
| Power Requirements | 220V, 50Hz, Single Phase 110V*, 60Hz (Optional) |
|
| Operating Temperature | 22°C -30°C | |
What is included for Dynamic mUCV:
- Chiller module – 1 unit
- Thermal head (TECs included) – 1 unit.
- Thermal controllers (come with PSU& Chassis) – 1 unit.
Testing target: For Characterization Board
Dynamic mUCV
CTS Chiller
Thermal Controller w I/O
for mUCV
What is included for mUCV:
- Chiller module – 1 unit
- Thermal head (TECs included) – 1 unit.
- Thermal controllers (come with PSU& Chassis) – 1 unit.
Testing target: For Characterization Board
mUCV
CTS Chiller
Thermal Controller w I/O
for mUCV
What is included for mUDV:
- Chiller module – 1 unit
- Thermal head (TECs included + 6 screws design) – Can support up to 2 unit.
- Thermal controllers (come with PSU& Chassis) – Can support up to 2 unit.
Testing target: For Development Vehicle Board
mUDV
CTS Chiller
Thermal Controller
for mUDV
Chiller Specification
- Intelligent PID temperature control with high stability
- Under table design with beautiful shape, space saving
- Stainless steel small water tank
- Various connectors provided
- Low noise and high performance
- CE certified
| Specifications | ||
|---|---|---|
| Dimension | L875mm x W560mm x H730mm | |
| Weight | 110kg | |
| Cooling Capacity | 3300W @ 25°C | |
| Temperature Control | PID | |
| Cooling Mode | Compressor Cooling | |
| Refrigerant | R404a | |
| Temperature Range | -20°C to 35°C | |
| Temperature Stability | ±0.1°C | |
| Pump Pressure | 1 ~ 4bar | |
| Pump Flow | 20 ~ 50L/min | |
| Rated Flow | 30L/min @ 3.2bar | |
| S/S Reservoir | 8L | |
| Size of Connector | Rp ½ | |
| Electrical Requirements | ||
|---|---|---|
| Rated Current | 3900W | |
| Power Requirements | 220V, 50Hz, Single Phase 110V*, 60Hz (Optional) |
|
| Communication Port | RS232 / RS485 | |
GUI
