34-Pin: 10-Pin Header Cable

34-Pin: 10-Pin Header Cable

TP510110

This is a replacement cable for the Promira™ Serial Platform.  The 34-pin end has a locking friction ramp to ensure good connectivity with the Promira Serial Platform, while the end is a 10-pin, 5×2 0.010″ standard header.  This cable is backwards compatible with the I2C/SPI Activity Board, the CAN/I2C Activity Board Pro, and the High-Speed SPI Flash Demo Board.  It can be used with the 10-Pin Split Cable and the 10-Pin Grabber Clip Split Cable.

Key Features
  • Includes a 34-pin connector on one end to attach to your Promira Serial Platform and a 10-pin box header to attach to your project
  • The project side connector is a standard 5×2 0.100″ (2.54mm) pitch IDC type keyed box connector
  • The 34-pin box header is a standard 2×17, 0.079″ (2.00 mm) pitch IDC type keyed box connector
  • Cable is 5 inches (12.7cm) long to minimize signal degradation
  • For more advanced or power intensive applications, the 34-pin cables are recommended because they provide additional connectivity to your project, enabling features not available with the 10-pin cables. Please note, specific pins and functionality are determined by the applications licensed on your Promira Serial Platform.

Tech Specs

Product Specs

Lead Pin-Out: 10-Pin Header
10-pin connector pin specification:
I2C/SPI eSPI MDIO # # I2C/SPI eSPI MDIO
SCL/SS1/GPIO-0 Alert#-0 1 2 GND GND GND
SDA/SS2/GPIO-1 CS2/Alert#-1 3 4 VTGT1 VTGT1 VTGT1
MISO/GPIO-2 IOO MDIO 5 6 VTGT2 VTGT2 VTGT2
SCK/GPIO-3 SCK MDC 7 8 MOSI/GPIO-4 IO1
SS0/GPIO-5 CS0 9 10 GND GND GND

Your trusted semiconductor supply chain partner

Contact Us