ACT v2 Connector Module: USB 3.1 Standard-A to Lightning USB2
TP823010
The Advanced Cable Tester v2 Connector Module: USB 3.1 Standard-A to Lightning USB2 enables testing of cables with USB 2.0 Standard-A on one cable end and Apple Lightning USB2 on the other cable end using the Total Phase Advanced Cable Tester v2.
Test Compatibility/Coverage
- Verify proper power on for the Lightning plug
- Individually measure the DC resistance of VBUS and GND wires
- Verify wiring is correct with no shorted or disconnected wires
- Signal Integrity testing of USB 2.0 pairs is supported at about 518 Mbps
- Quiescent current test pass/fail reported
- Over-voltage protection test pass/fail reported
- Voltage recovery test pass/fail reported (Apple MFi membership required to run these tests)
Insertions
- Insertion/test count tracking ensures reliable operation
- By using the highest quality connectors, the expected life span without any test degradation for the Type-C bundle modules is 5,000 tests per module
- All connector modules require the use of the Total Phase Advanced Cable Tester v2
Tech Specs
Connections
- Each module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only
- 1 USB 3.1 Standard-A receptacle and 1 Lightning USB2 receptacle
Operating Temperature
- 10º–35º C (50º–95º F)
- 1 ACTv2 Connector Module: USB 3.1 Standard-A to Lightning USB2
Minimum Hardware Requirements
- Requires the MFi compatible Advanced Cable Tester v2
Software
- Included with the Advanced Cable Tester v2
Dimensions and Weight
- W x D x H: 19.4 mm. x 3.8mm. x 3.5 mm (7 5/8 in. x 1 1/2 in. x 1 3/8 in.) excluding attachment pins
- 90 g (2.5 oz)
Quality
- REACH, RoHS, China RoHS
- One Year Warranty
- Manufacturing: ISO 9001, ISO 13485, AS9100C, ITAR
- Warranty for 90 days or 1000 insertions, whichever comes first