


ADP2100-U Hi-voltage Diff. Probe;USB port
• Powered by USB port (power bank)
• Bandwidth : 100MHz
• Bandwidth limit : 5MHz / Full
• Over-range indicator
• Over-range alarm
• Double-layer probe cable for power insulation
• EC conformity : EN 61010-031:2002 +A1:2008
• Works for any grounded DSO with an BNC port
The ADP2100-U is a high-performance differential voltage measurement probe with a BNC interface, designed for easy connection to any oscilloscope with a corresponding interface. It is powered via USB, eliminating the need for an additional power supply. This probe is suitable for various electronic testing and measurement environments and allows users to safely measure differential voltages of up to ±1400 V.
In cases where your measurements exceed the linear range of the probe, the ADP2100-U provides visual and audible warning indicators to ensure that you promptly detect measurements exceeding the range. This helps prevent potential damage or hazards, contributing to the safety of your equipment and testing work.
Specifications are as follows:
• Powered by USB port (power bank)
• Bandwidth:100MHz
• Attenuation:20X / 200X
• Input Voltage : 1400V
• Input Impedance:10Mohm, 1pF
EC conformity:
EN 61010-031:2002 +A1:2008
CAT II 1000V, CAT III 600V

Bandwidth (-3dB) | 100MHz |
Attenuation | 1:20/200 |
DC Gain Accuracy | ±2% |
Offset zero (Scope gain=1X) | ±10 mV |
Between Inputs | 10Mohm, 1pF |
Each input to Gnd | 5Mohm, 2pF |
Rise time (small signal, 10-90%, 20-30°C) | ≦3.7ns |
Input voltage Diff. Vin (DC+ pk AC) | 200X: ±1400V 20X: ±140V |
Input voltage Comm. Vin | ±1400V |
Input voltage Max. Vin to Earth | CAT II 1000V CAT III 600V |
Impulse withstand | 4000V |
CMRR (typical) | 60Hz: > 80dB 100kHz: > 60dB 3MHz: > 40dB 10MHz: > 35dB |
Power by | USB (5V, < 250mA) |
Length of BNC / USB-cable | 90cm |
Length of Lead-cable | 24cm |