Features:

• Supports eMMC version up to 5.1 HS400 / HS200 / CMD Queue
• 3-Pin Mode：If you only need to analyze the waveform data of CMD and BUSY, 3-Pin Mode will be a good choice. You do not need to connect all the pins in the measurement. You only need to connect the CLK, CMD, and D0 pins to measure the CMD data.
• No Clk Mode：If you need to record the CMD waveform data for a long time, you can ONLY connect CMD pin. Then you can do the CMD analysis with transitional storage.

Description:

• The order to record all data flow from Low Power Mode to High-Speed Mode.
• “Data Filter” filters unwanted data to save memory.
• “Search” searches specific data.
• “CRC Packet” displays and counts CRC
• Can display eMMC/MMC 5.1 protocol packet data in tabular form, including command parsing
• eMMC/MMC 5.1command statistics include numbers of packets, individual commands, different data lengths, and errors
• eMMC/MMC 5.1 command trigger

1. Settings

2. Data Phase Tuning

3-Pin Mode

No Clk Mode

Can display eMMC protocol packet data in tabular form, including command parsing